CHAPTER
Env-A 500 Standards APPLICABLE TO cERTAIN nEW OR mODIFIED fACILITIES AND
SOURCES OF HAZARDOUS AIR POLLUTANTS; STATE PLANS FOR DESIGNATED FACILITIES AND
POLLUTANTS
Statutory
Authority: RSA 125-C:4
PART
Env-A 501 PURPOSE
Env-A 501.01 Purpose. The purpose of this chapter is to establish
state standards to regulate:
(a)
Certain new or modified facilities in accordance with authority
delegated by the EPA under §111(c) of the Clean Air Act;
(b)
Certain sources of hazardous air pollutants in accordance with authority
delegated by the EPA under §112 of the Clean Air Act;
(c)
Certain sewage sludge incineration units that commenced construction on
or before October 14, 2010 in accordance with
authority delegated by the EPA under §129(b)(2) of the Clean Air Act; and
(d) Certain municipal
solid waste landfills that commenced construction on or before July 17, 2014 and have not been modified or reconstructed since July
17, 2014 in accordance with authority delegated by the EPA under §111(d) of the
Clean Air Act.
Source. #721.19, eff
12-7-75; ss by #1717, eff 2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff
12-27-84; ss by #5033, eff 12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02;
ss by #9643, eff 1-23-10; ss by #12387, eff 9-22-17; ss by #13381, eff 5-25-22
PART Env-A
502 references
Env-A 502.01 References.
(a)
For the purpose of this chapter, unless otherwise specified all
references to 40
(b)
If any requirement specified in Env-A 503.01, Env-A 504.01, Env-A
505.01, or Env-A 506.01 is inconsistent with any requirement specified in other
provisions of Env-A 100 et seq., NH Rules Governing the Control
of Air Pollution, the more stringent requirement shall control.
Source. #721.19, eff
12-7-75; ss by #1717, eff 2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff
12-27-84; ss by #5033, eff 12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; amd
by #7840, eff 3-1-03; amd by #8041, eff 2-14-04; amd by #8277, eff 1-28-05; amd by
#8535, eff 12-31-05; amd by #8876, eff 4-27-07; amd by #9489, eff 6-23-09; ss by #9643, eff 1-23-10; ss by
#9864, eff 2-10-11; amd by #10076, eff 1-25-12; amd by #10254, eff 1-23-13; amd
by #10980, eff 11-20-15; ss by #12387, eff 9-22-17; ss by #13209, eff 5-25-21;
ss by #13381, eff 5-25-22
PART
Env-A 503 New Source Performance Standards
Env-A 503.01 New Source Performance Standards. The owner or operator of a new or modified
facility shall comply with the following provisions of 40 CFR 60, Standards of
Performance for New Stationary Sources, as applicable:
(a)
Subpart A, General Provisions, except for §§60.4, 60.9, 60.10,
and 60.16;
(b)
Subpart D, Standards of Performance for Fossil-Fuel-Fired Steam
Generators for which Construction is Commenced after August 17, 1971;
(c)
Subpart Da, Standards of Performance for Electric Utility Steam
Generating Units for which Construction is Commenced after September 18, 1978;
(d)
Subpart Db, Standards of Performance for
Industrial-Commercial-Institutional Steam Generating Units;
(e)
Subpart Dc, Standards of Performance for Small
Industrial-Commercial-Institutional Steam Generating Units;
(f) Subpart E, Standards of Performance for Incinerators;
(g)
Subpart Ea, Standards of Performance for
Municipal Waste Combustors for which Construction is Commenced after December
20, 1989 and on or before September 20, 1994;
(h)
Subpart Eb, Standards of Performance for Large Municipal Waste
Combustors for which Construction is Commenced after September 20, 1994 or for which Modification or Reconstruction is
Commenced after June 19, 1996;
(i) Subpart Ec,
Standards of Performance for Hospital/Medical/Infectious Waste Incinerators for
which Construction is Commenced after June 20, 1996;
(j)
Subpart I, Standards of Performance for Hot Mix Asphalt Facilities;
(k)
Subpart J, Standards of Performance for Petroleum Refineries;
(l) Subpart Ja, Standards of Performance for
Petroleum Refineries for which Construction, Reconstruction, or Modification
Commenced after May 14, 2007;
(m)
Subpart K, Standards of Performance for Storage Vessels for Petroleum
Liquids for which Construction, Reconstruction, or Modification Commenced after
June 11, 1973, and prior to May 19, 1978;
(n)
Subpart Ka, Standards of Performance for Storage Vessels for Petroleum
Liquids for which Construction, Reconstruction, or Modification Commenced after
May 18, 1978, and prior to July 23, 1984;
(o)
Subpart Kb, Standards of Performance for
Volatile Organic Liquid Storage Vessels, Including Petroleum Liquid Storage
Vessels, for which Construction, Reconstruction, or Modification Commenced
after July 23, 1984;
(p)
Subpart L, Standards of Performance for Secondary Lead Smelters;
(q)
Subpart M, Standards of Performance for Secondary Brass and Bronze
Production Plants;
(r)
Subpart N, Standards of Performance for Primary Emissions from Basic
Oxygen Process Furnaces for which Construction is Commenced after June 11, 1973;
(s)
Subpart O, Standards of Performance for Sewage Treatment Plants;
(t)
Subpart Y, Standards of Performance for Coal Preparation and Processing Plants;
(u)
Subpart AA, Standards of Performance for Steel Plants: Electric Arc
Furnaces Constructed after October 21, 1974 and on or
before August 17, 1983;
(v)
Subpart AAa, New Source Performance Standards
for Electric Arc Furnaces and Argon-Oxygen Steel Plants;
(w)
Subpart BB, Standards of Performance for Kraft Pulp Mills;
(x)
Subpart DD, Standards of Performance for Grain Elevators;
(y)
Subpart EE, Standards of Performance for Surface Coating of Metal Furniture;
(z)
Subpart GG, Standards of Performance for Stationary Gas Turbines;
(aa)
Subpart KK, Standards of Performance for Lead-Acid Battery Manufacturing
Plants;
(ab)
Subpart LL, Standards of Performance for Metallic Mineral Processing Plants;
(ac)
Subpart QQ, Standards of Performance for the Graphic Arts Industry:
Publication Rotogravure Printing;
(ad)
Subpart RR, Standards of Performance for Pressure Sensitive Tape and
Label Surface Coating Operations;
(ae)
Subpart TT, Standards of Performance for Metal Coil Surface Coating;
(af) Subpart UU, Standards of Performance for Asphalt
Processing and Asphalt Roofing Manufacture;
(ag)
Subpart VV, Standards of Performance for Equipment Leaks of VOC in the
Synthetic Organic Chemicals Manufacturing Industry;
(ah)
Subpart VVa, Standards of Performance for Equipment Leaks of VOC in
the Synthetic Organic Chemicals Manufacturing Industry for Which Construction,
Reconstruction, or Modification Commenced after November 7, 2006;
(ai)
Subpart WW, Standards of Performance for the Beverage Can Surface
Coating Industry;
(aj) Subpart XX, Standards of Performance for Bulk
Gasoline Terminals;
(ak) The following sections of Subpart AAA,
Standards of Performance for New Residential Wood Heaters:
(1)
§§60.530-531;
(2)
§60.532(a)-(c);
(3)
§60.536(a)-(f); and
(4)
§60.538(a)-(d) and (g)-(i);
(al)
Subpart BBB, Standards of Performance for the Rubber Tire Manufacturing Industry;
(am)
Subpart FFF, Standards of Performance for Flexible Vinyl and Urethane
Coating and Printing;
(an)
Subpart GGG, Standards of Performance for Equipment Leaks of VOC in
Petroleum Refineries;
(ao) Subpart HHH, Standards of Performance for
Synthetic Fiber Production Facilities;
(ap)
Subpart JJJ, Standards of Performance for Petroleum Dry Cleaners;
(aq) Subpart NNN, Standards of Performance for Volatile
Organic Compound Emissions from Synthetic Organic Chemical Manufacturing
Industry (SOCMI) Distillation Operations;
(ar) Subpart OOO, Standards of Performance for
Nonmetallic Mineral Processing Plants;
(as)
Subpart QQQ, Standards of Performance for VOC Emissions from Petroleum Waste Water Systems;
(at)
Subpart SSS, Standards of Performance for Magnetic Tape Coating Facilities;
(au)
Subpart TTT, Standards of Performance for Industrial Surface Coating:
Surface Coating of Plastic Parts for Business Machines;
(av)
Subpart UUU, Standards of Performance for Calciners and Dryers in
Mineral Industries;
(aw)
Subpart VVV, Standards of Performance for Polymeric Coating of
Supporting Substrates Facilities;
(ax)
Subpart WWW, Standards of Performance for Municipal Solid Waste Landfills;
(ay)
Subpart XXX, Standards of Performance for Municipal Solid Waste
Landfills That Commenced Construction, Reconstruction, or Modification After
July 17, 2014, effective August 29, 2016;
(az) Subpart AAAA, Standards of Performance for
Small Municipal Waste Combustion Units;
(ba) Subpart CCCC, Standards of Performance for
Commercial and Industrial Solid Waste Incineration Units;
(bb)
Subpart EEEE, Standards of Performance for Other Solid Waste Incineration
Units;
(bc) Subpart IIII, Stationary Compression Ignition
Internal Combustion Engines;
(bd)
Subpart JJJJ, Stationary Spark Ignition Internal Combustion Engines;
(be)
Subpart KKKK, Stationary Combustion Turbines;
(bf)
Subpart LLLL, Standards of Performance for New Sewage Sludge
Incineration Units;
(bg) Subpart OOOO, Standards of Performance for
Crude Oil and Natural Gas Production, Transmission and Distribution for which
Construction, Modification or Reconstruction Commenced after August 23, 2011,
and on or before September 18, 2015;
(bh) Subpart OOOOa, Standards
of Performance for Crude Oil and Natural Gas Facilities for Which Construction,
Modification or Reconstruction Commenced after September 18, 2015;
(bi)
The following sections of Subpart QQQQ, Standards of Performance for New
Residential Hydronic Heaters and Forced-Air Furnaces:
(1)
§§60.5472-5473;
(2)
§60.5474(a) and (b);
(3)
§60.5478(a)-(e); and
(4)
§60.5480(a)-(d) and (g)-(i); and
(bj) Subpart TTTT, Standards of Performance for
Greenhouse Gas Emissions for Electric Utility Generating Units.
Source. #721.19, eff
12-7-75; ss by #1717, eff 2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff
12-27-84; ss by #5033, eff 12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02;
amd by #8876, eff 4-27-07; amd by #9489, eff 6-23-09; ss by #9643, eff 1-23-10;
amd by #10076, eff 1-25-12; amd by #10980, eff
11-20-15; ss by #12387, eff 9-22-17; ss by #13209, eff 5-25-21; ss by #13381,
eff 5-25-22
PART
Env-A 504 National Emission Standards for Hazardous Air Pollutants
Env-A 504.01 National Emission Standards for Hazardous
Air Pollutants. The owner or
operator of any stationary source that emits a hazardous air pollutant
regulated under 40 CFR 61, National Emission Standards for Hazardous Air
Pollutants, shall comply with the following provisions of 40 CFR 61, as
applicable:
(a)
Subpart A, General Provisions;
(b)
Subpart C, National Emission Standards for Beryllium;
(c)
Subpart E, National Emission Standards for Mercury;
(d)
Subpart J, National Emission Standards for Equipment Leaks, Fugitive Emission
Sources, of Benzene;
(e)
Subpart M, National Emission Standards for Asbestos,
as incorporated by reference in Env-A 1800, with amendments;
(f)
Subpart V, National Emission Standards for Equipment Leaks, Fugitive
Emission Sources; and
(g)
Subpart FF, National Emission Standards for Benzene Waste Operations.
Source. #721.19, eff
12-7-75; ss by #1717, eff 2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff
12-27-84; ss by #5033, eff 12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02;
ss by #8277, eff 1-28-05; ss by #8535, eff 12-31-05; ss by #9643, eff
1-23-10; ss by #12387, eff 9-22-17; ss by #13209, eff 5-25-21
PART
Env-A 505 National Emission Standards for Hazardous Air Pollutants for Source
Categories
Env-A 505.01 National Emission Standards for Hazardous
Air Pollutants for Source Categories.
The owner or operator of any stationary source that emits a hazardous
air pollutant listed pursuant to Section 112(b) of the Clean Air Act shall
comply with the following provisions of 40 CFR 63, National Emission Standards
for Hazardous Air Pollutants for Source Categories, as applicable, unless a
title V permit with equivalent terms has been issued for such source in
accordance with 40 CFR §63.94:
(a)
Subpart A, General Provisions;
(b) Subpart D, Regulations Governing Compliance
Extensions for Early Reductions of Hazardous Air Pollutants;
(c)
Subpart F, National Emission Standards for Organic Hazardous Air
Pollutants from the Synthetic Organic Chemical Manufacturing Industry;
(d)
Subpart G, National Emission Standards for Organic Hazardous Air
Pollutants from the Synthetic Organic Chemical Manufacturing Industry for
Process Vents, Storage Vessels, Transfer Operations, and Wastewater;
(e) Subpart H, National Emission
Standards for Organic Hazardous Air Pollutants for Equipment Leaks;
(f)
Subpart I, National Emission Standards for Organic Hazardous Air
Pollutants for Certain Processes Subject to the Negotiated Regulation for
Equipment Leaks;
(g)
Subpart J, National Emission Standards for Hazardous Air Pollutants for
Polyvinyl Chloride and Copolymers Production;
(h)
Subpart L, National Emission Standards for Hazardous Air Pollutants for
Coke Oven Batteries;
(i) Subpart N, National Emission Standards for
Chromium Emissions from Hard and Decorative Chromium Electroplating and
Chromium Anodizing Tanks;
(j)
Subpart O, Ethylene Oxide Emissions Standards for Sterilization Facilities;
(k)
Subpart Q, National Emission Standards for Hazardous Pollutants for
Industrial Process Cooling Towers;
(l)
Subpart R, National Emission Standards for Gasoline Distribution
Facilities, Bulk Gasoline Terminals and Pipeline Breakout Stations;
(m)
Subpart S, National Emission Standards for Hazardous Air Pollutants from
the Pulp and Paper Industry;
(n)
Subpart T, National Emission Standards for Halogenated Solvent Cleaning;
(o) Subpart U, National Emission Standards for
Hazardous Air Pollutant Emissions: Group I Polymers and Resins;
(p) Subpart W, National Emission
Standards for Hazardous Air Pollutants for Epoxy Resins Production and
Non-nylon Polyamides Production;
(q) Subpart X, National Emission
Standards for Hazardous Air Pollutants from Secondary Lead Smelting;
(r)
Subpart Y, National Emission Standards for Marine Tank Vessel Loading Operations;
(s)
Subpart AA, National Emission Standards for Hazardous Air Pollutants
from Phosphoric Acid Manufacturing Plants;
(t)
Subpart BB, National Emission Standards for Hazardous Air Pollutants
from Phosphate Fertilizer Production Plants;
(u) Subpart CC, National Emission Standards for
Hazardous Air Pollutants from Petroleum Refineries;
(v) Subpart EE, National Emission
Standards for Hazardous Air Pollutants for Magnetic Tape Manufacturing Operations;
(w)
Subpart GG, National Emission Standards for Aerospace Manufacturing and
Rework Facilities;
(x)
Subpart HH, National Emission Standards for Hazardous Air Pollutants
from Oil and Natural Gas Production Facilities;
(y)
Subpart II, National Emission Standards for Shipbuilding and Ship
Repair, Surface Coating;
(z)
Subpart JJ, National Emission Standards for Wood Furniture Manufacturing
Operations;
(aa)
Subpart KK, National Emission Standards for the Printing and Publishing Industry;
(ab)
Subpart LL, National Emission Standards for Hazardous Air Pollutants for
Primary Aluminum Reduction Plants;
(ac)
Subpart MM, National Emission Standards for Hazardous Air Pollutants for
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone
Semichemical Pulp Mills;
(ad)
Subpart OO, National Emission Standards for Tanks – Level 1;
(ae)
Subpart PP, National Emission Standards for Containers;
(af) Subpart QQ, National Emission Standards for
Surface Impoundments;
(ag)
Subpart RR, National Emission Standards for Individual Drain Systems;
(ah)
Subpart SS, National Emission Standards for Closed Vent Systems, Control
Devices, Recovery Devices and Routing to a Fuel Gas System or a Process;
(ai)
Subpart TT, National Emission Standards for Equipments
Leaks – Control Level 1;
(aj) Subpart UU, National Emission Standards for
Equipment Leaks – Control Level 2 Standards;
(ak) Subpart
VV, National Emission Standards for Oil-Water Separators and Organic-Water Separators;
(al)
Subpart WW, National Emission Standards for Storage Vessels, Tanks, –
Control Level 2;
(am)
Subpart YY, National Emission Standards for Hazardous Air Pollutants for
Source Categories: Generic Maximum Achievable Control Technology Standards;
(an)
Subpart CCC, National Emission Standards for Hazardous Air Pollutants
for Steel Pickling – HCI Process Facilities and Hydrochloric Acid Regeneration Plants;
(ao) Subpart DDD, National Emission Standards for
Hazardous Air Pollutants for Mineral Wool Production;
(ap)
Subpart EEE, National Emission Standards for Hazardous Air Pollutants
from Hazardous Waste Combustors;
(aq) Subpart GGG, National Emission Standards for
Pharmaceuticals Production;
(ar) Subpart HHH, National Emission Standards for
Hazardous Air Pollutants from Natural Gas Transmission and Storage Facilities;
(as)
Subpart III, National Emission Standards for Hazardous Air Pollutants
for Flexible Polyurethane Foam Production;
(at) Subpart JJJ, National Emission
Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins;
(au) Subpart LLL, National Emission
Standards for Hazardous Air Pollutants from the Portland Cement Manufacturing Industry;
(av)
Subpart MMM, National Emission Standards for Hazardous Air Pollutants
for Pesticide Active Ingredient Production;
(aw)
Subpart NNN, National Emission Standards for Hazardous Air Pollutants
for Wool Fiberglass Manufacturing;
(ax)
Subpart OOO, National Emission Standards for Hazardous Air Pollutant
Emissions: Manufacture of Amino/Phenolic Resins;
(ay)
Subpart PPP, National Emission Standards for Hazardous Air Pollutant
Emissions for Polyether Polyols Production;
(az) Subpart QQQ, National Emission Standards for
Hazardous Air Pollutants for Primary Copper Smelting;
(ba) Subpart
RRR, National Emission Standards for Hazardous Air Pollutants for Secondary
Aluminum Production;
(bb) Subpart TTT, National Emission
Standards for Hazardous Air Pollutants for Primary Lead Smelting;
(bc)
Subpart UUU, National Emission Standards
for Hazardous Air Pollutants for Petroleum Refining: Catalytic Cracking Units, Catalytic Reforming
Units, and Sulfur Recovery Units;
(bd) Subpart VVV, National Emission
Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works;
(be) Subpart XXX, National Emission
Standards for Hazardous Air Pollutants for Ferroalloys Production:
Ferromanganese and Silicomanganese;
(bf)
Subpart AAAA, National Emission Standards for Hazardous Air
Pollutants: Municipal Solid Waste Landfills;
(bg) Subpart CCCC, National Emission Standards for
Hazardous Air Pollutants for Manufacturing Nutritional Yeast;
(bh) Subpart DDDD,
National Emission Standards for Hazardous Air Pollutants for Plywood and
Composite Wood Products;
(bi) Subpart EEEE, National Emission Standards for
Hazardous Air Pollutants for Organic Liquids Distribution (Non-Gasoline);
(bj) Subpart
FFFF, National Emission Standards for Hazardous Air Pollutants for
Miscellaneous Organic Chemical Manufacturing;
(bk) Subpart GGGG, National Emission Standards for
Hazardous Air Pollutants for Solvent Extraction for Vegetable Oil Production;
(bl) Subpart HHHH, National Emission Standards for
Hazardous Air Pollutants for Wet Formed Fiberglass Mat Production;
(bm)
Subpart IIII, National Emission Standards for Hazardous Air Pollutants
for Surface Coating of Automobiles and Light-Duty Trucks;
(bn) Subpart JJJJ, National Emission Standards for
Hazardous Air Pollutants for Paper and Other Web Coating;
(bo) Subpart KKKK,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Cans;
(bp) Subpart MMMM, National Emission Standards for
Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products;
(bq) Subpart NNNN,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Large Appliances;
(br) Subpart OOOO,
National Emission Standards for Hazardous Air Pollutants for Printing, Coating,
and Dyeing of Fabrics and Other Textiles;
(bs) Subpart PPPP, National Emission Standards for
Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products;
(bt) Subpart QQQQ,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Wood Building Products;
(bu) Subpart RRRR,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Furniture;
(bv) Subpart SSSS,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Coils;
(bw) Subpart TTTT,
National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations;
(bx)
Subpart UUUU, National Emission Standards for Hazardous Air Pollutants
for Cellulose
Production Manufacturing;
(by)
Subpart VVVV, National Emission Standards for Hazardous Air Pollutants for Boat
Manufacturing;
(bz) Subpart WWWW,
National Emissions Standards for Hazardous Air Pollutants for Reinforced
Plastic Composites Production;
(ca) Subpart XXXX, National Emissions Standards
for Hazardous Air Pollutants for Rubber Tire Manufacturing;
(cb) Subpart YYYY, National Emission Standards for Hazardous
Air Pollutants for Stationary Combustion Turbines;
(cc)
Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutants for
Stationary Reciprocating Internal Combustion Engines;
(cd) Subpart AAAAA, National Emission
Standards for Hazardous Air Pollutants for Lime Manufacturing Plants;
(ce) Subpart BBBBB,
National Emission Standards for Hazardous Air Pollutants for Semiconductor Manufacturing;
(cf) Subpart CCCCC,
National Emission Standards for Hazardous Air Pollutants for Coke Ovens:
Pushing, Quenching, and Battery Stacks;
(cg) Subpart
DDDDD, National Emission Standards for Hazardous Air Pollutants for Industrial,
Commercial, and Institutional Boilers and Process Heaters;
(ch) Subpart EEEEE,
National Emission Standards for Hazardous Air Pollutants for Iron and Steel Foundries;
(ci) Subpart FFFFF, National Emission Standards
for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing Facilities;
(cj) Subpart GGGGG,
National Emission Standards for Hazardous Air Pollutants for Site Remediations;
(ck)
Subpart HHHHH, National Emission Standards for Hazardous Air Pollutants
for Miscellaneous Coating Manufacturing;
(cl)
Subpart IIIII, National Emission Standards for Hazardous Air Pollutants
for Mercury Cell Chlor-Alkali Plants;
(cm)
Subpart JJJJJ, National Emission Standards for Hazardous Air Pollutants for
Brick and Structural Clay Products;
(cn) Subpart KKKKK,
National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing;
(co)
Subpart
LLLLL, National Emission Standards for Hazardous Air Pollutants for Asphalt Processing
and Asphalt Roofing Manufacturing;
(cp)
Subpart MMMMM, National Emission Standards for Hazardous Air Pollutants for Flexible
Polyurethane Foam Fabrication Operations;
(cq) Subpart NNNNN,
National Emission Standards for Hazardous Air Pollutants for Hydrochloric Acid Production;
(cr) Subpart PPPPP,
National Emission Standards for Hazardous Air Pollutants for Engine Test Cells/Stands;
(cs)
Subpart QQQQQ, National Emission Standards for Hazardous Air Pollutants for
Friction Materials Manufacturing Facilities;
(ct) Subpart RRRRR,
National Emission Standards for Hazardous Air Pollutants for Taconite Iron Ore Processing;
(cu)
Subpart SSSSS, National Emission Standards for Hazardous Air Pollutants for
Refractory Products Manufacturing;
(cv)
Subpart TTTTT, National Emission Standards for Hazardous Air Pollutants for
Primary Magnesium Refining;
(cw) Subpart UUUUU,
National Emission Standards for Hazardous Air Pollutants from Coal- and
Oil-Fired Electric Utility Steam Generating Units; and
(cx) Subpart JJJJJJ, National Emission Standards
for Hazardous Air Pollutants for Area Sources from Industrial, Commercial, and
Institutional Boilers, only if a source is currently permitted or will be
required to be permitted under Env-A 607.01(a), (b), or (c).
Source. #721.19, eff
12-7-75; ss by #1717, eff 2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff
12-27-84; ss by #5033, eff 12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02;
amd by #7840, eff 3-1-03; amd by #8041, eff 2-14-04; amd by #8277, eff 1-28-05;
amd by #8535, eff 12-31-05; amd by #8876, eff 4-27-0-7; amd by #9489, eff
6-23-09; ss by #9643, eff 1-23-10; amd by #10254, eff
1-23-13; amd by #10980, eff 11-20-15; ss by #12387,
eff 9-22-17
PART Env-A
506 STATE PLANS FOR DESIGNATED
FACILITIES AND POLLUTANTS
Env-A 506.01 State Plans for Designated Facilities and
Pollutants. The owner or operator of
a designated stationary source shall comply with the following subparts of
40 CFR 62, Approval and Promulgation of State Plans for Designated
Facilities and Pollutants, as applicable:
(a) Subpart LLL,
Federal Plan for Existing Source Sewage Sludge Incineration Units; and
(b)
Subpart OOO, Federal Plan Requirements for Municipal Solid Waste
Landfills That Commenced Construction On or Before
July 17, 2014 and Have Not Been Modified or Reconstructed Since July 17, 2014.
Source. #12387, eff 9-22-17;
ss by #13381, eff 5-25-22
APPENDIX
|
Rule |
Specific Section of State or
Federal Statute or Regulation which the Rule Implements |
|
Env-A
501.01(a) |
RSA
125-C:4, I(a); 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 501.01(b) |
RSA 125-C:4, I(a); 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR 63; 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR 63 |
|
Env-A 501.01(c) |
RSA
125-C:4, I(a); 42 U.S.C. §7411(d); 40 CFR 62 |
|
Env-A
502 |
RSA 125-C:4,
I(a); 42 U.S.C. §7411(c); 40 CFR 60; 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR 63 |
|
Env-A
502.01 |
RSA 125-C:4, I(a); 42 U.S.C. §7411(c), (d); 42 U.S.C.
§7412(l); 40 CFR 60; 40 CFR 61; 40
CFR 62; 40 CFR 63 |
|
Env-A
503 |
RSA 125-C:4,
I(a); 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 503.01 |
RSA 125-C:1; RSA
125-C:6, II & XI; 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 504 |
RSA
125-C:4, I(a); 42 U.S.C. §7412(l); 40 CFR 61 |
|
Env-A
505.01 intro, (cg), |
RSA
125-C:4, I(a); 42 U.S.C §7412(l); 40 |
|
Env-A 505.01 intro., (h) |
RSA 125-C:4,
I(a); 42 U.S.C. §7412(I); 40 CFR 63 |
|
Env-A
505.01(an) |
RSA
125-C:4, I(a); 42 U.S.C. §7412(I); 40 |
|
Env-A
505.01 intro, (cg), (cw) |
RSA
125-C:1; RSA 125-C:6, II & X; 42 U.S.C. §7412(l); 40 CFR 63 |
|
|
|
|
Env-A
506.01 |
RSA
125-C: 4, I(a); 42 U.S.C. §7411(d); 40 CFR 62 |